Details: Category: Pages; Hits: 3464

NAT Loopback is when you stream video from your PC to livehamcams.com and you can not see your video on that page and everyone else outside your network can.

Please read the linked article on the website about NAT Loopback to fully understand

My work around for this issues is to modify the host files, do not attempt this unless you fully understand host files and OS

The first thing you will need to do is sign up for a free Dynamic DNS

Next you will need to add this entry to your host files

(This would be your local ip of the computer that you have webcamxp runing on) 192.168.x.x (This entry would be your free DNS that you signed up for) yourcall.dynamic-dns.net

Mine would look like this 192.168.1.50 k3bm.dynamic-dns.net

That should work for you if your router does not support NAT Loopback

73's

K3BM

Resources:

http://www.changeip.com/dns.php

http://www.howtogeek.com/howto/27350/beginner-geek-how-to-edit-your-hosts-file/

Details: Written by K3BM; Category: Pages; Published: 18 January 2016; Hits: 6621

Why Stream here?

We offer real time streaming solutions for the Amateur Radio Operator with no Commercials or lengthy delays
Easy configuration
We can also figure your setup with Teamvier if you are having problems doing so
HD 1280 x 720 Resolution
Our Platform is on a VPS server, not a shared platform, so faster streaming
Friendly and helpful techs to guided you

NAT Loopback and what it is: click here

My work around for NON supported NAT Loopback routers : Click Here

General Rules for Streaming subject to change (Updated 01-19-2016)

Absolutely there will be no streaming of pornographic, offensive, x-rated, r-rated, questionable, or commercial material.
Streaming is limited to three camera sources
You are responsible for your streaming material
Streaming should be radio related or hobby related
Video Streaming is open to all licensed amateur radio operators within the US and Canada.

The webmaster reserves the right to add and remove operators at his discretion.

Jim
K3BM

If you agree with these terms and would like to stream please Contact K3BM

Please provide us with you Public IP and port that you will be using

If your Public IP has changed you will need to contact me with the new one

If you IP change often then you may want to use one of the DNS services

Please visit our Software Link for the software and tools you will need to get streaming now

Getting started:

You must first set a Static IP for the work station that you are using

In this case we will use the IP of 192.168.1.75

Assign a static IP to your computer in this format:
IP 192.168.X.75
SUB 255.255.255.0
Gateway 192.168.X.1 this is the address of your router
DNS 192.168.X.1 this also is the address of your router

X being the subnet of your system (Usually 1 or 0)

Please click on the Port Forward link to configure your router

The IP used must be out of or excluded from the DHCP range set in you router

This case the DHCP address pool starts at 192.168.1.10 and goes to 192.168.1.60, so we are ok with 192.168.1.75

You must forward your static IP of 192.168.X.75 to a UDP port within your router

UDA Ports open vary upon ISP

Some UDA ports used are 80, 8080, and 8888

If your ISP keeps changing you're Public Dynamic IP you will need to sign up for one of The Dynamic DNS Services

Please download the webcamXP Free edition to the computer that host your camera and install.

The Web Server must be de-activated to configure

Add the IP of you work station here along with the port that you are using (Click on the Web/Broadcast button)

After you configure this page you can click on the Activate button

We recommend either the Microsoft Life Cam HD Webcam or the Logitech Pro 9000

To effectively stream HD video you MUST have a high speed Internet along with a fast Computer (Duo Core with 4 Gigs of Ram Min)

More to come....

01-18-2016 How to Stream your Video on QRZ (Flash Script courtesy of KZ2Q)

The script is free to use, Jeremy KZ2Q developed it

You can stream your video on your QRZ bio page by using the Webcam Flash Script, simple paste that script in your page using the advanced settings html editor.

Here is the script you will need, simple replace the X's with your Global IP or your Domain name. http://X.X.X.X:8080 (8080 being the port)

In this case we are using port 8080, you will have change that number if you are using different port.

For this to work you need to be streaming with webcam 7 software on your computer.

HERE IS THE CODE

That's it...Enjoy

K3BM